Ladder type cable tray roll forming machine

-
The ladder type cable tray made by roll forming machine, it improves the flexural capacity of whole bridge. There are ribs on the side and underside, make the cable tray beautiful in appearance and has high load capacity. Noramlly the size is around:
Maximum thickness 2mm, Ladder length is 2 meters, 6 meters long span. If there is specail, the cable tray also could be customized.

Here are some simple cable tray drawing profiles for your reference:

Finished product samples made by our machine:

Based on the design, we make machine like the following:

Main elements of ladder type cable tray roll forming machine:

NO.ItemDescription
1DecoilerHydraulic, mnual or motor (customize)
2Leveling PartGuarantee that the products are neat
3Punching and shearing partThis part will punch material to the type as customer required.
4Roll forming machineCheck detail below
5Hydraulic StationHydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. and two sets of electromagnetism valves
6Electric Control SystemAdopted PLC, transducer, touch panel from Delta Taiwan to ensure high speed with stability, precision and lifetime.

Main ladder cable tray machine roll forming machine parameters:

Feature: Ensure the stability, accuracy and long life.
Voltage: customize by customer.
Method for fixing roller: arch type.
Material of shafts: 400# I-beam
Transmission method: gear box
1). the main shaft material: No. 45 steel quenching and tempering treatment, the outer shaft diameter is90mm
2). Wheel material: quenching process of GCr15 bearing steel HRC58-60
3) Roller: 20 stations.
4). the main motor power: 22kw
5) Forming: 12M per minute.

Why choose ladder trype cable roll forming machine:

1.Sizes are adjustable, no need to change spacer, all fully automatic.
2.Accuracy could be guaranteed. High quality punching and shearing system. 
3.No need to change shearing blade: post shearing system, so no need change or adjust baldes for different sizes. 
4.Pillar stand, fast speed and long time to use. 
For this machine, if you want to know more information, please contact us at any time.  

If you want to know more, please feel free to send us a email.
Email: machinesale01@zhongtuocn.com

Comments

Post a Comment

Popular posts from this blog

Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11

-
Image
Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11 is specailly designed for the UK market. Steel shutters are used to help prevent unauthorized access and vandalism to premises by adding an extra barrier between "outside" and whatever entrances they may be protecting. When open, the shutters provide an almost unobstructed aperture as the shutter and mechanism store above the doorway and out of the way. Furthermore, the doors are tough and have a long life with little maintenance required.  For the UK-Mode ZTAC11 drawing profile here for your reference:   For the Solid Steel Shutter matched elements like U channel guardrail, and the bottom slat, we also can make for you; in next ariticle I will share more information. Here mainly for the Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11: Solid Steel Shutter Machine Introduction: 1.Gcr12 Mov roller material, equal to SKD11. Very hard, long time to use.  2.Hydraulic shearing with the ser
Read more

Slotted angle rolling forming machine

-
Image
Slotted angle machine allows you to make the slotted angle in batch by rolling forming principle. Slotted angle (also sometimes referred to as slotted angle iron) is a system of reusable metal strips used to construct shelving, frames, work benches, equipment stands and other structures. The name derives, first, from the use of elongated slots punched into the metal at uniform intervals to enable assembly of structures fixed with nuts and bolts, and second, from the longitudinal folding of the metal strips to form a right angle. Here are some drawing profile and finished product pictures for your reference: Sample in real: Slotted angle rolling forming machine design: The machine is composed by the following elements: Slotted angle usage: To construct items from slotted angle, items can be cut to size (some versions are marked to show the optimum points at which to cut the metal) using special slotted angle cutters or shears, and then fixed with nuts and bolts. Tension
Read more

Metal coil door frame roll forming machine

-
Image
Metal coil door frame roll forming machine Steel door frame machine is a good choice for strength and durability, the finished product of this machine is of the highest quality and high strength, offering a high level of security, These are some drawing profiles and finished production pictures: Hydraulic Punching hole, angle & forming in one production line with Computer Control System. Spot welding free, each corner has been pre-cut with a 45 mitre, giving a accurate fit There is a simple of drawing profiles for your reference: Here is one picture of finished product: According to this information, we advice you a machine as following: main parameters of this machine: 1) Machine frame: middle plate frame 2) roller material: GCr15MoV quenching treatment 58-60° 3) Main motor power: 11kw. 4) Hydraulic power: 4KW. 3) Voltage: 380v,50Hz,3 phase 4) Cutting blade: Cr12mov quenching treatment 58-62°. 5) Cutting tolerance: +/- 1.0mm, 45degree cutting system. 6) Drive: Chain
Read more