Steel roof battens roll forming machine

-
Steel Roof Battens are a versatile and easy to use batten, they can be fixed directly to the rafters using timber or metal self drilling screws, or nails through the flanges. The roof cladding is then fixed to the Battens using self drilling screws.

Here is a drawing profile and finished product of the steel roof battens


Advantage of steel roof battens

Long life, quality:  Roof Batten section is guaranteed a long life; all material conforms to Australian standards. Steel Roof Battens are impervious to white ants, borers or rotting. TrueCore zinc/ aluminium coated steel provides the best protection from the environment, giving long life to any building.
Labour and cost savings:  Roof Batten section is manufactured locally by continuously roll-forming prefinished steel coil, and with the efficient profile it is a low cost building material. Ease of construction and fast fixing of frame members allow fast erection time, and low labour costs. A protective coating on the section means it will last for years without the need for attention, keeping maintenance costs very low.
Flexibility:   By using Steel Roof Battens you have complete freedom of design, with alterations, additions and renovations also easily made. Indeed Roof Battens are suitable for applications other than roofing. Steel Roof Battens can be used for framing van bodies, floor stiffeners, bracing, awning support frames, furring channel and shelving.
Compatibility:    Steel Roof Battens are compatible with all standard roof cladding materials, and it can also be used in combination with other systems such as timber.
Here is a picture of steel roof battens roll forming machine

Parameters of steel roof battens roll forming machine:

Size: 4800х800х1400
Weight t: 2.2tons
Voltage:380V/50HZ3Phase(as customer’s request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12 ,QUENCING 58-60° dedicated processing
Material of shafts: 45# steel with tempering
Diameter of shafts: φ50mm
Number of rollers :12rollers
Main power: 5.5 kw
Speed: 25 m/min
Cycloidal planetary gear speed reducer

Handling and storage of steel roof battens

If Roof Battens are to be stacked and left in the open for any length of time, ensure they are kept off the ground, with one end elevated to drain any collected moisture. Gloves should be worn when handling to prevent injury.

Performance of steel roof battens

Roof Batten - maximum spans and spacing (non-cyclonic)
Maximum span - 1200mm Maximum spacing - Internal Spans - 1200mm End spans (Up to 900mm Span) - 900mm Note: the batten spacing must not exceed the manufacturers maximum recommended support spacing for the roof cladding material. These values are for buildings located under the following conditions as specified by AS.1170 Part 2, SAA Wind Code: Area - Non-Cyclonic Maximum Building Height - 5m Wind Velocity - 50m/s Internal Pressure Coefficient -+0.8 Terrain Category -3.

If you want to know more detail information about the machine, please feel free to contact with us at any time.
Email: roofingmachine@zhongtuocn.com
Whatsapp: +8615127755788 and +8613733275488

Comments

Post a Comment

Popular posts from this blog

Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11

-
Image
Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11 is specailly designed for the UK market. Steel shutters are used to help prevent unauthorized access and vandalism to premises by adding an extra barrier between "outside" and whatever entrances they may be protecting. When open, the shutters provide an almost unobstructed aperture as the shutter and mechanism store above the doorway and out of the way. Furthermore, the doors are tough and have a long life with little maintenance required.  For the UK-Mode ZTAC11 drawing profile here for your reference:   For the Solid Steel Shutter matched elements like U channel guardrail, and the bottom slat, we also can make for you; in next ariticle I will share more information. Here mainly for the Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11: Solid Steel Shutter Machine Introduction: 1.Gcr12 Mov roller material, equal to SKD11. Very hard, long time to use.  2.Hydraulic shearing with the ser
Read more

Slotted angle rolling forming machine

-
Image
Slotted angle machine allows you to make the slotted angle in batch by rolling forming principle. Slotted angle (also sometimes referred to as slotted angle iron) is a system of reusable metal strips used to construct shelving, frames, work benches, equipment stands and other structures. The name derives, first, from the use of elongated slots punched into the metal at uniform intervals to enable assembly of structures fixed with nuts and bolts, and second, from the longitudinal folding of the metal strips to form a right angle. Here are some drawing profile and finished product pictures for your reference: Sample in real: Slotted angle rolling forming machine design: The machine is composed by the following elements: Slotted angle usage: To construct items from slotted angle, items can be cut to size (some versions are marked to show the optimum points at which to cut the metal) using special slotted angle cutters or shears, and then fixed with nuts and bolts. Tension
Read more

Metal coil door frame roll forming machine

-
Image
Metal coil door frame roll forming machine Steel door frame machine is a good choice for strength and durability, the finished product of this machine is of the highest quality and high strength, offering a high level of security, These are some drawing profiles and finished production pictures: Hydraulic Punching hole, angle & forming in one production line with Computer Control System. Spot welding free, each corner has been pre-cut with a 45 mitre, giving a accurate fit There is a simple of drawing profiles for your reference: Here is one picture of finished product: According to this information, we advice you a machine as following: main parameters of this machine: 1) Machine frame: middle plate frame 2) roller material: GCr15MoV quenching treatment 58-60° 3) Main motor power: 11kw. 4) Hydraulic power: 4KW. 3) Voltage: 380v,50Hz,3 phase 4) Cutting blade: Cr12mov quenching treatment 58-62°. 5) Cutting tolerance: +/- 1.0mm, 45degree cutting system. 6) Drive: Chain
Read more