4-in-1 bemo standing seam metal roofing sheet making machine

-
4-in-1 bemo standing seam metal roofing sheet making machine allows you to make the metal roofing sheet machine by one machine in batch fully automatic. By this one machine, it can help you make 4 different design by one machine. And also the bending machine of the bemo standing seam can make long span roofing for big project.

The panels can span distances of over 3m/10ft, depending upon the load criteria – and they can be installed without penetrating the standing seam.Tapered standing seam panels are ideal for cost-effectively cladding and roofing large round or conical buildings. These are produced on-site to your specifications in just a single operation.

 For the standing seam drawing profiles, here are some drawing profiles for your reference: 
All those styles could be made our following machine
Zhongtuo 4-in-1 bemo standing seam metal roofing sheet making machine has the following features:
1. Panels can be manufactured in widths between 305mm/12in and 500mm/19.7in – for highly efficient installation.
2. High quality and high accuracy: shafts for rollers are tooled by grinding machine. Rollers are CNC processed to ensure precision performance.
3. Accurately processing: Heat treatment for cutting frame to remove the steel stress, to avoid deformation.and hardness 60 degree.
4.  After sell service: we will give 24/7 service, we can send engineer to install the machine and train your workers. Lifttime services for our machines. 
Here are 4-in-1 bemo standing seam metal roofing sheet making machine parameters for your reference:
No.
                   Main parameter
1
 Length of the main part
 11500 х 1650 х 1450 mm
2
 Weight of main part
 6 Ton
3
 Voltage
 380 V/ 50 HZ 3 Phase (as customer’s request)
4
 Roller fixer
 Middle plate welded
5
 Frame
 400 H steel welded
6
 Frame thickness
 20mm thicker to be very strong
7
 Drive mode
 Chain of 1.25mm
8
 Material of rollers
 45# steel, surface hard chromium plating.
9
 Material of shafts
 45# steel
10
 Diameter of shafts
 Φ 60 mm
11
 Number of rollers
17 rollers
14
 Main power
 3kw 
For the 4-in-1 bemo standing seam metal roofing sheet making machine bending machine:
It can help you create long and large span for some factory building project.
And something like bemo standing seam metal roofing sheet, we have other designs for your reference:

And also if you need, please contact me at any time.
CONTACT US:
Email: roofingmachine@zhongtuocn.com
Whatsapp: +8615127755788 and +8613733275488 

Comments

Post a Comment

Popular posts from this blog

Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11

-
Image
Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11 is specailly designed for the UK market. Steel shutters are used to help prevent unauthorized access and vandalism to premises by adding an extra barrier between "outside" and whatever entrances they may be protecting. When open, the shutters provide an almost unobstructed aperture as the shutter and mechanism store above the doorway and out of the way. Furthermore, the doors are tough and have a long life with little maintenance required.  For the UK-Mode ZTAC11 drawing profile here for your reference:   For the Solid Steel Shutter matched elements like U channel guardrail, and the bottom slat, we also can make for you; in next ariticle I will share more information. Here mainly for the Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11: Solid Steel Shutter Machine Introduction: 1.Gcr12 Mov roller material, equal to SKD11. Very hard, long time to use.  2.Hydraulic shearing with the ser
Read more

Slotted angle rolling forming machine

-
Image
Slotted angle machine allows you to make the slotted angle in batch by rolling forming principle. Slotted angle (also sometimes referred to as slotted angle iron) is a system of reusable metal strips used to construct shelving, frames, work benches, equipment stands and other structures. The name derives, first, from the use of elongated slots punched into the metal at uniform intervals to enable assembly of structures fixed with nuts and bolts, and second, from the longitudinal folding of the metal strips to form a right angle. Here are some drawing profile and finished product pictures for your reference: Sample in real: Slotted angle rolling forming machine design: The machine is composed by the following elements: Slotted angle usage: To construct items from slotted angle, items can be cut to size (some versions are marked to show the optimum points at which to cut the metal) using special slotted angle cutters or shears, and then fixed with nuts and bolts. Tension
Read more

Metal coil door frame roll forming machine

-
Image
Metal coil door frame roll forming machine Steel door frame machine is a good choice for strength and durability, the finished product of this machine is of the highest quality and high strength, offering a high level of security, These are some drawing profiles and finished production pictures: Hydraulic Punching hole, angle & forming in one production line with Computer Control System. Spot welding free, each corner has been pre-cut with a 45 mitre, giving a accurate fit There is a simple of drawing profiles for your reference: Here is one picture of finished product: According to this information, we advice you a machine as following: main parameters of this machine: 1) Machine frame: middle plate frame 2) roller material: GCr15MoV quenching treatment 58-60° 3) Main motor power: 11kw. 4) Hydraulic power: 4KW. 3) Voltage: 380v,50Hz,3 phase 4) Cutting blade: Cr12mov quenching treatment 58-62°. 5) Cutting tolerance: +/- 1.0mm, 45degree cutting system. 6) Drive: Chain
Read more