Roll Forming Machine to make 'L' Type Bottom Strips of shutter door

-
-Machine constructed from steel like molding frame or indepedent pillar.
-Machine fitted with a number of rolls with forming dies, through which a cut strip is passed like the hydraulic shearing or flying shearing system
-In a single pass, the desired 'L' Type Bottom Strip is formed
-Drive of the machine through machine cut gears in bearings having lubrication arrangement.
Where to use the  'L' Type Bottom Strips of shutter door. From the following installation drawing, we can see that, the down part of the rolling shutters, it is near to the ground. So the botttom part it is flat.
Mode: ZTAC-'L' Type Bottom Strips of shutter door

Matched with  'L' Type Bottom Strips of shutter door is specially designed for north African market like Algeria and other country. In those market, the material thickness of making Garage Roller Shutter Door to 1.2mm. So the machine needs to be very strong, we use the gearbox as the transmission. Molding frame as the Garage Roller Shutter Door making frame. So the machine even if handle more thickness or strong thickness material, it also can work very well. 
Here are some pictures of this machine.
The shearing part of Roll Forming Machine to make 'L' Type Bottom Strips of shutter door:
Mode: Mode: Roll Forming Machine to make 'L' Type Bottom Strips of shutter door is composed by the following elements: decoiler, leveling beach,main rolling shutter machine, hydraulic shearing system and autiamtic stacker. 
Machine working speed: 25m/min. 
Roller station: 16
Roller material: SKD11
Control system: Semens PLC
Shearing: servo motor control, flying shearing.
Transmission default: gearbox
Motor brand: Semens
Automatic degree: Fully automatic.
For the bottom slat there are many other options for your reference :
Where Roll Forming Machine to make 'L' Type Bottom Strips of shutter door is used:
Warehouses, Factories, Large apertures (openings in excess of 16sqm)
Industrial units
Commercial units (especially if powder coated)
Here are some usage pictures for your reference:
And as the elements to the rolling shutters, we also can design the machine for guardrail, shutter box and shaft and others.
If you have the requirements about this machine or others, please feel free to contact with us. 
Contact Information:
Email: roofingmachine@zhongtuocn.com
Whatsapp: +8615127755788

Comments

  1. JeffreyEdwardsMay 2, 2021 at 8:46 AM

    I just want to thank you for sharing your information and your site or blog this is simple but nice Information I’ve ever seen i like it i learn something today.  Honeycomb Blinds

    ReplyDelete

Post a Comment

Popular posts from this blog

Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11

-
Image
Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11 is specailly designed for the UK market. Steel shutters are used to help prevent unauthorized access and vandalism to premises by adding an extra barrier between "outside" and whatever entrances they may be protecting. When open, the shutters provide an almost unobstructed aperture as the shutter and mechanism store above the doorway and out of the way. Furthermore, the doors are tough and have a long life with little maintenance required.  For the UK-Mode ZTAC11 drawing profile here for your reference:   For the Solid Steel Shutter matched elements like U channel guardrail, and the bottom slat, we also can make for you; in next ariticle I will share more information. Here mainly for the Solid Steel Shutter Machine of Rolling Forming for UK-Mode ZTAC11: Solid Steel Shutter Machine Introduction: 1.Gcr12 Mov roller material, equal to SKD11. Very hard, long time to use.  2.Hydraulic shearing with the ser
Read more

Slotted angle rolling forming machine

-
Image
Slotted angle machine allows you to make the slotted angle in batch by rolling forming principle. Slotted angle (also sometimes referred to as slotted angle iron) is a system of reusable metal strips used to construct shelving, frames, work benches, equipment stands and other structures. The name derives, first, from the use of elongated slots punched into the metal at uniform intervals to enable assembly of structures fixed with nuts and bolts, and second, from the longitudinal folding of the metal strips to form a right angle. Here are some drawing profile and finished product pictures for your reference: Sample in real: Slotted angle rolling forming machine design: The machine is composed by the following elements: Slotted angle usage: To construct items from slotted angle, items can be cut to size (some versions are marked to show the optimum points at which to cut the metal) using special slotted angle cutters or shears, and then fixed with nuts and bolts. Tension
Read more

Metal coil door frame roll forming machine

-
Image
Metal coil door frame roll forming machine Steel door frame machine is a good choice for strength and durability, the finished product of this machine is of the highest quality and high strength, offering a high level of security, These are some drawing profiles and finished production pictures: Hydraulic Punching hole, angle & forming in one production line with Computer Control System. Spot welding free, each corner has been pre-cut with a 45 mitre, giving a accurate fit There is a simple of drawing profiles for your reference: Here is one picture of finished product: According to this information, we advice you a machine as following: main parameters of this machine: 1) Machine frame: middle plate frame 2) roller material: GCr15MoV quenching treatment 58-60° 3) Main motor power: 11kw. 4) Hydraulic power: 4KW. 3) Voltage: 380v,50Hz,3 phase 4) Cutting blade: Cr12mov quenching treatment 58-62°. 5) Cutting tolerance: +/- 1.0mm, 45degree cutting system. 6) Drive: Chain
Read more