Metal Door Frame Roll Forming Machine

-
Metal Door Frame Roll Forming Machine is a kind of roll forming machine which is developed to make various kinds of metal door frames, by roll forming method. By this one metal door roll forming production line, you can finish punch holes, cutting end connection part and others.

Main Parameters:

Forming Roller Stations: 24 Stations
Forming Roller shaft: Ø65mm, 40Cr, quenching, treating
Forming rollers GCr15, quenching, hardness HRC50-58º
Forming Speed: 8-15 meters / min
Main motor: 7.5kw
Feed material thickness: (0.5-2.0) mm× L
Line speed Adjusted by Frequency Inverter
Power: 380V/3ph/50Hz
Run-out table mode: roller style
Line dimension: 15000×1000×1000mm

Composition of Metal Door Frame Roll Forming Machine:

1. De-coiler
  • Loading capacity:1.5T
  • Uncoiling width:500mm (according to the profile drawing)
  • Inner diameter450-550mm

2. Feeding and Leveler
  • Usage: Put the raw material(steel plate) through the beach to manufacture and process,it can guarantee that the products are neat, parallel and everything is uniformity.Please refer to the equipment regulation to know the function of locate angle iron.
3. Roll Forming
  • Roller material :45# steel, surface hard chromium plating.
  • Shaft material : 45# steel with tempering
  • Outer diameter of shaft :70mm
  • frame : 400H steel
  • Voltage: 380v,50Hz,3 phase As customer`s need
  • Dimensions:15400 * 1800 *1800mm Final size depend on the design
  • Main power: 8.5-15kw Depend on the thickness of material and size of machine
  • Forming steps rollers: 12-20 stations Final rollers depend on the design
  • Speed :8-15m/min
4.Cutting Part
  • Material of blades : Gcr12MoV quenched
Sample of shutter door:

The video of Metal Door Frame Roll Forming Machine:


CONTACT US:

Comments

Post a Comment

Popular posts from this blog

Decking machine Floor deck roll forming machine

-
Image
Floor deck is a kind of steel material for building the house. The warehouse, the supermarket, the airport. ZHONGTUO factory is professional making the floor deck roll forming machine, we can design the machine as your require and the floor deck thickness. Take the drawing below for an example! The floor deck roll forming machine also include: The decoiler, the feeding system and the roll forming system and the cutting system. It si near the single layer roll forming machine. Below is main specifications of this floor deck forming machine: Main parameters of ZT 915 floor deck forming machine 1 Suitable material galvanizes sheet/ colored coil 2 Width of the feeding material 1300 mm 3 Effective width of the plate 915 mm 4 Thickness of feeding material 0.8-1.2mm 5 Productivity 15m/min 6 Two Main motor power 11kw +11kw 7 Rollers’ material 45# steel Rolling chromium 8 Diameter of shaft 90mm 9 Wall thickness of the main forming machine 22mm steel plate ...
Read more

Combined C U Channel Roll Forming Machine

-
Image
Combined C U Channel Roll Forming Machine PACKAGE: NUDE PACKAGING IN 1*20 GP CONTAINER LEAD TIME: WITHIN 30 WORKING DAYS AFTER RECEIVED THE DEPOSIT Combined C U Channel Roll Forming Machine Customer requirements: Combined C U Channel Roll Forming Machine  Working Process: Combined C U Roll Forming Machine Decoiler System Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system. Loading capacity: 1.5T Uncoiling width: 300mm Inner diameter: 450-550mm Combined C U Roll Forming Machine Entry Beach Usage: Put the raw material (steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. Combined C U Roll Forming Machine Usage: In order to keep the product shape and precision, ...
Read more

T grid ceiling making machine

-
Image
A typical suspended or false ceiling grid work is made up from a combination of metal interlocking sections connected together to form the openings for ceiling tiles. The metal channels are formed in the shape of an upside down 'T' which is usually finished with a white paint to match the ceiling tiles inside. The T bars are supported at various intervals by a suspension mechanism, usually galvanised wire. The ceiling is usually supported around the perimeter by an 'L' shaped metal section, referred to as edge trim. A random drawing profile of T grid ceiling Supporting material thickness: 0.3to 0.6mm Forming speed: 30 m/min  Parameters of T grid ceiling making machine Material thickness:0.3-0.6 mm Roll station: 16 stations Motor power: 7.5 kw Productivity: 30 m/min Type:automatic Ceiling T Grids of Suspension System Application: Ceiling T Grids, A system of Ceiling Suspension System members, The ceiling T Bar Lay in Grid System consists of only one t...
Read more