Roof ridge cap roll forming machine
Roof ridge cap roll forming machine is for making ridge caps or valley flashings installed along the ridge line of a sloped roof or in valleys. A top roof ridge cap roll forming machine wins its name by the purpose or function of producing top roof ridge cap, while a roof valley flashing roll forming machine most of time makes valley flashing or roof valley flashing, which are installed mainly in the valleys where the runoff is concentrated.
Here is the drawing profile of roof ridge cap
Features of roof ridge cap:
(1)They’re quicker. Less time spent means more money saved! By spending less time cutting, you’ll save on labor costs.
(2)They’re safer. Everyone benefits from a tidier job site! Because the pieces are pre-trimmed, your installers won’t be slipping or tripping over cut scraps of shingle. Homeowners will appreciate a cleaner job site, too.
(3)They look better. Get great-looking results every time, in less time! No more uneven cuts. Because these cap shingles are pre-tapered, installers will be able to follow straighter application lines more consistently. If the profile requires dimensional depth, simply use a double layer.
Technical Parameters of roof ridge cap roll forming machine
Material thickness: 0.4-0.8 mm
Roll station: 12 stations
Motor power: 4+4 kw
Productivity: 3-5 m/min
Machine weight: about 3.5 tons
How to install the roof ridge cap
During the installation of metal roof panels, there are always roof flashing required. Those flashing installed along the ridge line to protrude from the roof of a building to deflect water away from seams or joints are called roof ridge cap.
Now that we've installed panel on both sides of the valley, we have to close off the ridge lines. On the right-hand side, we have an open ridge, so we'll be installing a ventilated ridge. And on the other side, the ridge is closed. The installation of the ridge cap is the same as the hip cap. We use a Z-trim and make sure to have tape seal underneath the Z-trim and between the ridge cap and the top of the Z. You cut Z-trims for the top of your panels. You use your ridge cap to mark the ribs so that you know where to place the Z-trims. Once the Z-trim has been fastened to the roof panel, you position your ridge cap and fasten it to the Z-trim using POP rivets. If you want to finish the ridge cap at the gable, let it over hang by about an inch, make your marks, and bend it down. The result is a nice clean look, and it will ensure that water doesn't get in between the top of the gable trim and the underside of the ridge cap.
Here is a video about the machine for your check
Contact us:
Email: roofingmachine@zhongtuocn.com
Whatsapp: +8615127755788 and +8613733275488
Here is the drawing profile of roof ridge cap
Features of roof ridge cap:
(1)They’re quicker. Less time spent means more money saved! By spending less time cutting, you’ll save on labor costs.
(2)They’re safer. Everyone benefits from a tidier job site! Because the pieces are pre-trimmed, your installers won’t be slipping or tripping over cut scraps of shingle. Homeowners will appreciate a cleaner job site, too.
(3)They look better. Get great-looking results every time, in less time! No more uneven cuts. Because these cap shingles are pre-tapered, installers will be able to follow straighter application lines more consistently. If the profile requires dimensional depth, simply use a double layer.
Technical Parameters of roof ridge cap roll forming machine
Material thickness: 0.4-0.8 mm
Roll station: 12 stations
Motor power: 4+4 kw
Productivity: 3-5 m/min
Machine weight: about 3.5 tons
During the installation of metal roof panels, there are always roof flashing required. Those flashing installed along the ridge line to protrude from the roof of a building to deflect water away from seams or joints are called roof ridge cap.
Now that we've installed panel on both sides of the valley, we have to close off the ridge lines. On the right-hand side, we have an open ridge, so we'll be installing a ventilated ridge. And on the other side, the ridge is closed. The installation of the ridge cap is the same as the hip cap. We use a Z-trim and make sure to have tape seal underneath the Z-trim and between the ridge cap and the top of the Z. You cut Z-trims for the top of your panels. You use your ridge cap to mark the ribs so that you know where to place the Z-trims. Once the Z-trim has been fastened to the roof panel, you position your ridge cap and fasten it to the Z-trim using POP rivets. If you want to finish the ridge cap at the gable, let it over hang by about an inch, make your marks, and bend it down. The result is a nice clean look, and it will ensure that water doesn't get in between the top of the gable trim and the underside of the ridge cap.
Here is a video about the machine for your check
Email: roofingmachine@zhongtuocn.com
Whatsapp: +8615127755788 and +8613733275488
Comments
Post a Comment